Видео

how did you get your model tree and ribbon to be that dark theme?

Muy genial, gracias por compartir esta info

This saved me so much time at work lol. Thank you so much!!

Useful, my master geometry comes in as a part, I can make it phantom so it doesn't populate the BOM.

Hi, thanks for the video, I need the video for the overlapping hose creation and authoring, could you please specify which is it?

A couple years behind this original post, but I came here after searching for why my main assembly isn't showing in my BOM. I get all of the parts showing up, but not the main assembly. It's a FAB and everything is set to NORMAL, and I select "FAB" when initiating my parts list, but the only thing that doesn't show up is the main assembly (I don't have any subassemblies). It's not a large assembly by any stretch either. My parts list is set to STRUCTURED too. What am I missing??

Man thank you so much for your tutorial, I saved a lot time for my 3D Modeling to put Pin Locations

olá, eu tenho uma planta gigante em navs, eu seleciono um corpo e exporto para fbx. mas quando abro no 3dmax esse corpo nao esta perfeito ele fica todo irregular tem como corrigir?

Can you make the leader come in vertically to the middle bottom of the text?

I have a comment about this kind of structure, is it possible to make the flat belt of the conveyor translate, as it does in the real motion ? Because this body is seen like a rigid one

might aswell build a rocket while im at writing codes to get simple sircumference on a program that cant even utilise ITS OWN TOOLS in perfect conditions,I FREAKING HATE INVENTOR NOW they can shove this crap

can inventor be even more useless,the king of redundance in cad that almost never works,not even for the educators on youtube teaching us to work with this dumbass overpriced work of crap,realy need to get all my workflow off autodesk useless products because their now just milking the crap out of a dried out system,even freecad trumps inventor these days and thats free,Autodesk needs to wipe the doggy doo out their eyes

Finally Something that makes sense

Gracias. Eres lo máximo. Saludos desde Perú.😊😊

How can i contact you please, because i am having problem to check my custom template. the new tube or pipe style is there, but it's not showing when creating a new pipe as it supposed to be.

THANK YOU i needed to switch to general instead of text

Dude it is the most obvious tool but still doesn't work, my matched cell has the matched text style.

and for Diameters of less than 1/2in?

רואן סעב

How do I change to fractional dimensions

Can you please show me how to convert the tube length in frame to be fractional. Inventor please.

Share code please

They should really make it more clear to not put formulas in the size parameters, that was why I was stuck. Thanks!

Hey thanks. Easy to follow and its saving me a lot of time atm.

Hello, Could you please let me know how to make a new texture of the loom or wire? I need to make a 2colored striped wire like blue and white. Thank you

Pete Strycharske! Hey, not sure if you monitor the comment section, but this is Brian Chute. I found this channel while searching for Inventor tutorials. Good to see you, old friend!

How to save this modification so that it remains the default from now on? Do I replace the template? Thanks for your help, your video helped me a lot!

wtf ? autocad ain't a 3d software even today, wtf people are talking about ? please don't mislead ppl ...

Thank you! Still very useful

dude thanks!!!!!!

Hi, great video, the editing multiple lines at once is really useful!! My office still use Inventor 2021 and this trick doesn't seem to work on it which is a shame. Do you know the name of this command so that maybe I can assign something to it?

Inventor supports "unfold in flat pattern" option which you can check when authoring the IDE. The problem is when you need to have a different K factor that the one in your sheet metal unfold rule.

Can the iam file be a single file with multiple model state, just like the ipt file with multiple model state?

Thank you!

JUST what i was looking for , thank you

So far, this is the best explanatory video for placing your own part in the content center! Thanks for the help!!!!

Jesus, this is NOT history of CAD, this is advert on AutoCAD. In reality AutoCAD was and still is a niche product in professional CAD and CAE application. CATIA, IDEAS, Microstation and now SolidWorks were, and are way to go. And before AutoCAD there were plenty of professional CAD systems running on mainframes with specialized graphics terminals, and later on Workstations from HP, SUN, Dec, SGI... AutoCAD was a budget solution and mostly 2D despite the 3D name... So sorry, thumbs down for misleading name.

Can you please explain how you turned that 90 degree flange on that cylinder?

Excellent video; the last part only focused to AutoCAD / Autodesk and Left out Bentley Microstation, Micrografx Designer (later owned by Corel) - and Corel CADD as well as Siemens CAD Software and the concept of BIM (And many other open source alternatives available for Windows MAC Linux)

thanks....but please stop say "go ahead and", its like "um"

Very useful, thank you

Thank you. Good info!

Does it work in CAD?? How can I use it?

Thank you very much for this video, I know, it is a year old, but it helped me a lot 🙂👍

I can't snap to my circles is there a setting for this?

Hi, how do you get the face of the slot and helix to be flat (to follow the geometry of the tool used to cut it, ie end mill)

Ca ne ressemble en rien à ce que j'ai!!!!

So helpful, Thanks!

thank you

Pete, I know that there is a .preset file for the custom presets, do you know if there is a way to make that into an Excel based system? Or maybe it already exists somewhere?